Elmo QBiC S X1 Manual de Instruções descarregar pdf (Página 6)

PREPARATIONS

INSTALLATION OF BATTERY PACK/CHARGING

*Battery pack is not inserted in the product. Battery is not fully charged at the time of

purchase. Charge the battery fully before starting to use the product.

1. The rating label which mentions product name; etc. is attached at the bottom of

the product (①). Slide 2 knobs to the opposite directions of the arrows on the

label and unlock. Slide and open the slot(②). Insert the battery pack. Slide and

close the slot. Lock the knobs.

① ②

2. Turn off the product. Charging is not possible while the power is on.

3. Open the micro USB port cover. Connect the micro USB plug (smaller one) of the

supplied USB cable to the micro USB port of the product.

4. Connect the USB plug of the USB cable to a USB port on the supplied AC

adapter your PC.

5. [Power LED] on the product blinks in red while charging.

6. Battery is fully charged when [Power/LED LED] turns off.

Charging from the USB port on your PC is possible.

However, be sure to turn off the product and note that it takes longer time

to charge than when using the AC adapter.

Charging from the USB port on your PC

1 2 3 4 5 6 7 8 9 10 11 ... 31 32

Sem comentários

Elmo QBiC S X1 Manual de Instruções Página 6