Elmo TND4004 Manual de Instruções

DOME CAMERAINSTRUCTION MANUALThe exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating

- 9 -(11) Adjust the focus with the focus ring (Fig. 12).* Adjust the focus after adjusting the angleof view.(Fig. 12)Focus ring(12) Match the "I

- 10 -4-2 How to Connect the Cables(1) Prepare the coaxial cable end as shown (Fig. 15).(2) Connect the coaxial cable and power cables tothe terminal

- 11 -PRECAUTIONS FOR USE AND INSTALLATION* Never aim the camera at the sun.Never aim or point the camera at the sun even if youare not shooting.* Do

- 1 -IMPORTANT SAFETY INSTRUCTIONS1. Read these instructions.2. Keep these instructions.3. Heed all warnings.4. Follow all instructions.5. Do not use

- 2 -1. Appearance view2. Specifications()106 (4.2)SR53 (2.1)SR56 (2.2)Unit : mm (inch)ModelPower sourcePower consumptionPick-up deviceEffective pictu

- 3 -3. Name and Function of Each PartMetal fittingFor mounting on the ceiling or wall.Hook (3 locations)For temporarily fixing the main body.Main bod

- 4 -Tilt lock screwFor locking the tilt after adjusting the image up/downdirection.Pan lock screwFor locking the pan after adjusting the imageright/l

- 5 -4. Preset (MWB)Color temperature can be selected from among four different color temperatures.b. INT/LL switch· INT (internal) control switchWhen

- 6 -70mm (2.76")Recommended mounting surface is wood or dry wall.(1) Make a round hole of 70mm OD (2.76") to themounting surface where the

- 7 -(6) Mount the body to the metal fitting.Match the positioning mark on the main bodywith the mark on the metal fitting, andthrust the main body t

- 8 -(8) While watching the monitor, adjust the imagedirection.· Right/left direction (Fig. 8)Loosen the pan lock screw, turn the baseright and left,