Elmo ExtrIQ line Guia de Instalação descarregar pdf (Página 17)

Hornet and Bee Installation Guide

MAN-HRBEIG (Ver. 1.3)

www.elmomc.com

Chapter 3:

Installation

The Hornet and Bee must be installed in a suitable environment and properly connected to its

voltage supplies and the motor.

3.1. Site Requirements

You can guarantee the safe operation of the Hornet and Bee by ensuring that they are installed

in an appropriate environment.

Feature Value

Ambient operating temperature -40 °C to +70 °C (-40 °F to 160 °F)

Maximum operating altitude 155,000 m (510,000 ft)

Maximum non-condensing humidity 95%

Operating area atmosphere No flammable gases or vapors permitted in area

Caution: The Hornet and Bee dissipate heat by convection. The maximum ambient operating

temperature of –40 °C to +70 °C (-40 °F to +160 °F) must not be exceeded.

3.2. Unpacking the Drives

Before you begin working with the Hornet and Bee, verify that you have all of their

components, as follows:

• The Hornet or Bee servo drive

• The Composer software and software manual

The Hornet and Bee are shipped in cardboard boxes with Styrofoam protection.

To unpack the Hornet or Bee:

1. Carefully remove the servo drive from the box and the Styrofoam.

2. Check the drive to ensure that there is no visible damage to the instrument. If any damage

has occurred, report it immediately to the carrier that delivered your drive.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 72 73

Sem comentários

Elmo ExtrIQ line Guia de Instalação Página 17