Elmo ExtrIQ line Guia de Instalação descarregar pdf (Página 27)

Hornet and Bee Installation Guide Installation

MAN-HRBEIG (Ver. 1.3)

www.elmomc.com

3.7. Main Power and Motor Power

The Hornet and Bee receive power from main and delivers power to the motor.

Pin Function Cable Pin Positions

VP+ Pos. Power input Power

PR Power return Power

PE Protective earth Power

AC Motor DC Motor

PE Protective earth Motor Motor

M1 Motor phase Motor N/C

M2 Motor phase Motor Motor

M3 Motor phase Motor Motor

Note: When connecting several drives to several motors, all should be wired in the same

motor phases and feedback sequences. This will enable the same ExtrIQ program to run on

all drives.

Table 2: Connector for Main Power and Motor

3.7.1. Connecting Motor Power

Connect the M1, M2, M3 and PE pins on the Hornet/Bee in the manner described in Section 3.5

(Integrating the Hornet or Bee on a PCB). The phase connection is arbitrary as the Composer

will establish the proper commutation automatically during setup. However, if you plan to copy

the setup to other drives, then the phase order on all copy drives must be the same.

Figure 6: AC Motor Power Connection Diagram

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 72 73

Sem comentários

Elmo ExtrIQ line Guia de Instalação Página 27